With Easy Track’s unique rail system, installing your custom organization system is a snap. Just mount the sturdy, heavy-duty rail to the wall, then hang your Easy Track organization system onto the rail. It’s easy to add more products and accessories to the kits anytime you'd like to expand or customize your solution.

Most of our systems can be installed in a few quick steps using everyday household tools. Depending on the width of your space, a saw may be required in order to cut your rail, rods, or shelves. Make sure to measure your space and gather all of the necessary tools prior to installation.

To keep things simple, we’ve provided easy, step-by-step installation guides. To find installation guides, head to the Shop Products page, select the kit you are looking to build, scroll to the bottom of the page and select Installation.

We're here to help! Call our Customer Service team at 1.800.562.4257.




How to Install an Easy Track Closet System




How to Install the Easy Track Rail




Just how strong is an Easy Track rail?
With the rail properly mounted into the studs along your back wall, an 8-foot closet can hold up to 1,200 pounds.

How high should I hang the Easy Track rail?
We recommend that you hang the rail 76" from the floor (which will put the top of the product 84" from the floor). This height can be adjusted up or down a couple of inches according to your specific needs.

What tools will I need to install an Easy Track closet system?
You will need a stud finder, tape measure, level, drill, #2 Phillips drill head, and 1/8" and 1/2" drill bits. If your space is smaller than the maximum closet width that your purchased, you will also need a hacksaw to cut the rail and/or rods. A circular saw is recommended for cutting shelves.

Do the vertical panels have to be touching the sides of my closet?
No. To stabilize the last vertical panel by the side wall, simply screw the shelves into the vertical panel instead of using the shelf pins. (Note: for white rods only) If you are using hanging rods in this section, you'll also want to screw the rods and ends together.

How do I install a top shelf all the way across my closet?
Use shelf pins to hold each shelf at the top hole, or if you need to stabilize some of your verticals with the top shelf, screw in every other top shelf, then use shelf pins on the remaining shelves at the second hole. A shelf resting on pins sits higher than a shelf that has been screwed in, so your shelves will only be straight across if you use all shelf pins.

I have a closet with an odd width. How do I adjust the Easy Track starter unit to fit?
Make your adjustment in the double hanging section (rods) of your closet. Cut the closet rods with a hacksaw to decrease the width of the unit.



Ready to start a design?

Our easy-to-install closets were created with your space in mind.

Start a Design